Supply of Medicine and Medical / Surgical equipments : Each sterile pack should contain a\n"T"shaped Copper IUD with\nthreads'insertion tube, a movable flange\nand plunger ( insertion rod)\nThe dimensions and requirements for the\nfinished product should conform to the\nspecifications of The Population Council,\nNew York or comply with ISO 7439:2002\nor current version.\nThe IUD should be manufactured from\napproved raw material of US/European\norigin.\nThe "T" Shaped plastic frame should have\napproximately 176 mg copper wire on its\nvertical arm. In addition ,a copper sleeve\ncontaining apprximately 66.5 mg\ncopper should be on each horizontal\narm.Total surface area of Copper on the\ndevice should be 380mm2\nThe thread should be made of good quality\nmaterial. The thread knot at the\nbottom end of the IUD should be secure\nand not promote breakage under normal\nuse.\nThe insertion rod should snugly fit ( not fall\nout spontaneously) but slide smoothly\nwithin the insertion tube and should not\ntrap the thread.\nThe movable flange ( depth -gauge) should\nbe of blue colour and should be easily\nadjestable ( not too tight)\nThe IUD should be stable under nomal\nroom temperature (30C-35C) and humidity\n(75% 100%) prevaling in Sri Lanka.\nThe IUD pack should not be easily\ndamaged by heat, sunlight, water,\nmoisture, mechanical shocks and insects.\nThe expiry date should not be less than 7\nyears from the date of manufacture. etc ...

پروپوزل کی گذارش